Hot wire cutters - wire swap hands-on guide | Ghelfi - Produzione macchine ed attrezzature per edilizia

06 Nov Hot wire cutters – wire swap hands-on guide

Posted at 15:32h in Technical docs by Alberto Pittaluga 0 Comments

Quick practical visual guide helping you swap the wire on Ghelfi’s polistyrene hot-wire cutters, either single-panel or dual-panel models.

1.
Put one end of the wire through the hole on the bow terminal, on the opposite side of the spring.

2.
Wrap the wire around the terminal as shown in the picture

3.
This is how it should look like when done

4.
Put the other end of the wire through the loose end of the spring, and pull it using a plier.

5.
Pull the wire until the spring reaches 8 cm end-to-end.

6.
Bend the wire to lock the reached position.

7.
Wrap the wire onto itself to secure it. Cut any exceeding portion away.