CLICK – THE QUICK AND RELIABLE LEVELLING CAP
- Levelling system for tiles and slabs
- Screw technology
- Reusable cap with quick unlock system and scratch-savy edge
- Open structure granting full visibility on application point
- Single-use screw clips in linear, X or T shape
- No tools required for application
- Recommended both for floor and wall tiling
- Usable on tiles and slabs of any length and width
- Supports both interior and exterior tiling
- Supported tile thickness: 2 to 30 mm
- Built-in spacer calibres: 1 to 4 mm
- Patented
- Made in Italy
Ghelfi tile levelling system - leaflet (ENG)Description
INNOVATIVE AND RELIABLE
CLICK is Ghelfi’s patented new generation levelling system based on screw technology.
- Tile thickness support: from 2 to 30 mm
- Minimum joint calibre support 1 mm
- Built-in spacers: 2, 3 and 4 mm
- Ideal both for floor and wall tiling
- Equally supports slabs for interior and exterior installation
- Compatible with many previous generation systems
THE PATENTED QUICK LEVELLING CAP
CLICK’s cap is the item responsible for reaching perfect planarity in between adjacent tiles with zero effort. You can tie it by hand – no other tools required – and can be reused hundreds of times.
The structure bears generous side openings leaving full visibility on the application point at all times.
The bottom contact edge features a specially shaped surface designed to facilitate debris and dirt removal, thereby minimising the risk of scratching the tile.
Most importantly, Ghelfi’s patented unlocking system makes it possible to instantly release screw stumps after the break-up phase, avoiding those long and boring unscrewing sessions typical of so many ancient generation systems. Correspondingly, the cap will get instantly in-place at installation time by simply dropping it onto a placed screw clip – from then on only requiring a quick final tightening instead of those old full-length screwings.
Ghelfi’s patented yellow ring enable and disables screw grip in a snap
Thanks to Ghelfi’s patented yellow ring CLICK caps can be installed and tightened really quickly
Again thanks to the yellow patented ring screw stumps can be instantly extracted. No more unscrewing!
Remember: as it happens for all levelling systems, CLICK caps are supposed to be hit alongside the joint direction.
THE SCREW CLIPS
CLICK screw clips are supposed to be installed all along tiles perimeter. Then, just drop and tighten CLICK caps and levelling is done.
CLICK screws are available in various shapes – linear, X or T – to come close both contractor preferences and each particular job requirements. We made them in two versions, to support tiles and slabs up to 30mm thickness. And lastly: all clips come with a built-in spacer to help obtaining the most common joint calibres while laying, making old “crosses” a thing of the remote past.
CLICK levelling clips main range supports tiles and slabs 2 to 20 mm thick, which covers the entire market regarding interior installation porcelain gres (today reaching a maximum of 14mm thickness), the lower thickened porcelain market segment.
They are available in linear shape, for installation along tile sides, and in X or T shapes, for installation on tile corners in the case of straight bonds or running bonds, respectively.
All clips models and variations are produced in different colours to facilitate their identification in the warehouse, and on the building site.
Linear clip 1 mm joint
Linear clip 2 mm joint
Linear clip 3 mm joint
Linear clip 4 mm joint
X clip 2 mm joint
X clip 3 mm joint
X clip 4 mm joint
T clip 2 mm joint
T clip 3 mm joint
T clip 4 mm joint
CLICK levelling clips range also includes models with a longer structure designed to support tiles and slabs between 12 and 30 mm of thickness, which makes them the best choice for contractors specialising on thickned porcelain for interiors and exteriors, and landscaping.
Taller CLICK clips are available in linear shape for installation along tile sides, and carry built-in spacers ranging from 1 to 4mm joint calibre. Similarly to all other models in the range, these too are manufactured in different colours to ease on identification.
Base lineare H30 fuga 1 mm
Base lineare H30 fuga 2 mm
Base lineare H30 fuga 3 mm
Base lineare H30 fuga 4 mm
QUANTITIES PER SQUARE METER
Check here below to know how many screw clips are recommended depending on tile sizes, given in centimetres, and bond scheme. When working on particularly wide or long tiles some contractors prefer using one or more additional elements per square meter. When adopting X or T screw clips, some professionals prefer to also add one or more linear clips along tile sides.
Linear clips
X clips, straight bond
T clips, running bond
PRODUCT RANGE
LEVELLING CAPS
| SKU# | DESCRIPTION |
|---|---|
| 2229 | CLICK – THE QUICK AND RELIABLE LEVELLING CAP – PATENTED – 50 PCS BAG |
| 2228 | CLICK – THE FIXED LEVELLING CAP – 50 PCS BAG |
LINEAR SCREW CLIPS – H. MAX 20MM
| SKU# | DESCRIPTION |
|---|---|
| 2231 | CLICK – LINEAR SCREW CLIP 1MM JOINT – 200PCS BAG |
| 2239 | CLICK – LINEAR SCREW CLIP 2MM JOINT – 200PCS BAG |
| 2240 | CLICK – LINEAR SCREW CLIP 3MM JOINT – 200PCS BAG |
| 2242 | CLICK – LINEAR SCREW CLIP 4MM JOINT – 200PCS BAG |
LINEAR SCREW CLIPS – H. MAX 30MM
| SKU# | DESCRIPTION |
|---|---|
| 2256 | CLICK – LINEAR SCREW CLIP H12-30 1MM JOINT – 200PCS BAG |
| 2257 | CLICK – LINEAR SCREW CLIP H12-30 2MM JOINT – 200PCS BAG |
| 2258 | CLICK – LINEAR SCREW CLIP H12-30 3MM JOINT – 200PCS BAG |
| 2259 | CLICK – LINEAR SCREW CLIP H12-30 4MM JOINT – 200PCS BAG |
X SCREW CLIPS – H. MAX 20MM
| SKU# | DESCRIPTION |
|---|---|
| 2232 | CLICK – X SCREW CLIP 2MM JOINT – 200PCS BAG |
| 2233 | CLICK – X SCREW CLIP 3MM JOINT – 200PCS BAG |
| 2234 | CLICK – X SCREW CLIP 4MM JOINT – 200PCS BAG |
T SCREW CLIPS – H. MAX 20MM
| SKU# | DESCRIPTION |
|---|---|
| 2236 | CLICK – T SCREW CLIP 2MM JOINT – 200PCS BAG |
| 2237 | CLICK – T SCREW CLIP 3MM JOINT – 200PCS BAG |
| 2238 | CLICK – T SCREW CLIP 4MM JOINT – 200PCS BAG |
