MODULAR HOT WIRE CUTTER FOR INSULATION PANELS
- Perfectly cuts Expanded Polystyrene (EPS) or Expanded Extruded Polystyrene insulation panels
- Cut length up to 130cm
- Cut depth up to 25cm
- Modular full-aluminium structure
- Robust, solid, lightweight : it weighs only 7 Kg
- Low voltage (230V-36V) high power supply included
- Special extra-long durability thermal wire included
- Straight, skewed and partial cuts on all panel sides
- Fully removable cutting bow for freehand operation
- Wire heat-up time < 10 sec
- No pre-set downtime between wire heating cycels
- No-lock electrical switch safely drives wire turnoff between cuts
- Side extension, scaffold fixation kits available separately
- Made in Italy
COUPOUSE MODULAIRE AU FIL CHAUD - brochure (FRA)Description
Dedicated to insulation professionals, it is the ideal tool for cutting EPS/XPS panels to size during insulation coat installation. It allows for quick, accurate and cost effective operations in any type of environment or building site.
It works on commonly available materials: EPS, polystyrene / polyurethane foam and extruded polystyrene.
The machine carries out straight cuts, variable angle and partial cuts with the same ease. No crumble dispersion, waste reduction, and pollution is drastically reduced.
The cut precision obtained by a long hot wire produces perfectly fitting panels: avoid “thermal bridges” between panels, as required by the law.
Panels fit together perfectly
1. skew cut (on all sides), 2. straight cut, 3. step cut
Work anywhere you need, with the same ease: on the ground against a wall, or – with the help of optional accessories – on the ground far from a wall, or safely anchored onto a scaffold tube.
The machine operates at low voltage (36V). A powerful 250W – 220V electrical supply / transformer is included in the standard configuration.
A single user can make it ready for use in seconds, even when working on scaffolding. The all-aluminum frame weighs in at 7 Kg.
The cutting bow is fully removable, and can be used free-hand on large panels, or in difficult areas or positions.
The panel to be cut is positioned leaning onto an aluminum frame structure, supported by a graduated rail, which can additionally rotate to ease diagonal cuts on panel side / edge. An optional extension profile can be added on the right side of the machine to further extend cut material backside support.
Machine operations are totally safe, fast and accurate. The electrical switch located on the bow comes without lock-on mode, facilitating on heating wire exclusively at cut time – as required by regulations.
Our special cutting wire, coupled with our high-power electrical supply, allows for the maximum productivity: no cool-down time is required for the wire between one cut and the next one.
1721KIT1 – Modular hot wire cutter with (optional) lone stand kit
1721KIT2 – Modular hot wire cutter with (optional) lone standing kit, side support extension, and panel support bar extension
PRODUCT RANGE AND MAIN ACCESSORIES
| SKU# | DESCRIPTION |
|---|---|
| 1721 | MODULAR HOT WIRE CUTTER FOR INSULATION PANELS – 130CM |
| 1721KIT1 | MODULAR HOT WIRE CUTTER FOR INSULATION PANELS WITH LONE STAND KIT |
| 1721KIT2 | MODULAR HOT WIRE CUTTER FOR INSULATION PANELS WITH LONE STAND KIT, RIGHT SIDE PANEL SUPPORT KIT, AND PANEL SUPPORT BAR EXTENSION KIT |
| 1721 90 | SCAFFOLD FIXING KIT FOR MODULAR HOT WIRE CUTTER |
| 1721 91 | LONE STAND KIT FOR MODULAR HOT WIRE CUTTER |
| 1721 92 | RIGHT SIDE PANEL SUPPORT FOR MODULAR HOT WIRE CUTTER |
| 1721 93 | PANEL SUPPORT BAR EXTESION KIT 30CM FOR MODULAR HOT WIRE CUTTER |
