Catalogo
REVOLUTION 300
PrintREVOLUTION 300 – BRIDGE STRUCTURE TABLE WET SAW MACHINE – 3HP (2,2KW) 230V ENGINE – DIRECT TRANSMISSION – SUPPORTS Ø300 AND Ø350 BLADES – CUT DEPTH 11CM IN 1 PASS, 13CM IN DOUBLE PASS (Ø350) – AVAILABLE IN 2 STANDARD LENGTHS, OR BUILT ON DEMANDED LENGTH
Download PDF brochures
REVOLUTION 300
Bridge saw machine, ideal for wet cuts on marble, stone or thickened porcelain slabs and tiles.
Equpped with a 220V 3HP (2,2KW) engine, with direct transmission. Supports Ø 300 and 350 mm blades. It can cut up to 110 mm deep in a single run, 130 mm with double run.
Available in two standard models featuring different maximum cutting lengths:
Art. 1108 – REVOLUTION 300 – Cuts up to 100 cm long
Art. 1109 – REVOLUTION 330 – Cuts up to 130 cm long
As for all “New Generation” series Ghelfi machines, its main structure is made of Aluminum: it is therefore extremely resistant to any distortion, resulting in excellent cutting precision over time. Aluminum also means total rust resilience and very long life expectancy.
All Ghelfi cutting machines are manufactured and assembled in our manufacture production plant in Bologna, where since more than 50 years we continue to accrue an evolving experience in research, design, implementation and assistance on machinery and accessories needed every day by tiling, flooring and masonry professionals.
We serve the most demanding professionals, or customers with unusual requirements, building on-demand customized machines, or variations of our standard machines, based on their specific requirements.
Why is REVOLUTION 300 the best choice?
| ALUMINIUM CHASSIS | Machine’s chassis is made of extruded aluminium profiles, featuring superior robustness when compared to old generation iron-based machines. Aluminium is also unattackable by rust, and very lightweight. Perhaps most importantly, aluminum profiles are virtually undeformable even when the machine is placed on uneven surfaces, all this yelding much better cut precision over the entire product lifetime. |
| WORK SURFACE | The work surface is made of stainless steel – also unattackable by rust like the main chassis – minimising friction with cut material during positioning. It is split in two halves, easy to lift to facilitare underlying water tank cleansing. Worktable overall width is 57cm, easily supporting large slabs. |
| SLIDING BRIDGE AND MOVING PARTS | The bridge supporting cutting head’s horizontal sliding is made of an integral 80x80mm extruded aluminum profile. Cutting head’s movement is granted by 6 armored stainless steal ball bearings, running on 3 rails – two above the bridge, one underneath – also made of 100% stainless steel. Opposite to what happens on machines from our competition adopting nylon wheels regularly wearing out over time and usage, our bearings offer superior wear resistance, and virtually eliminate periodical maintenance / calibration requirements. |
| CABLE CHAIN | Electrical cables and water pipe feeding the cutting unit are protected by a robust yet very flexible plastic chain, assembled as to always keep above the sliding bridge thus offering protection from potentially severe damages originated during cut or transport. The chain features single-serviceable links. |
| DIRECT TRANSMISSION | The direct-transmission architecture offers better initial cue, resulting in superior cut results on marble and other similar materials. |
| WATER TANK | The water tank is made of Polyethylene, a very strong plastic material featuring resistance to low and high temperatures, and non-deformable. It is unattackable by rust, and does not leak. Equipped with a handy screw-cap, virtually impossible to accidentally be removed, it is easy to clean. |
| MITRE (45°) CUT | Horizontal sliding bridge and cutting head can easily be reclined to execute 45° (“mitre”) cuts. A plug-in extension applicable to base squares is supplied to extend them either side to better support mitreing on larger slabs. For the most demanding cases optional side tables and counter-square bars are also available. |
| HEAD TILTING SYSTEM | Cutting unit’s built-in vertical tilting system enables the operator to execute rectangular holes or special cuts, or calibrate cut thickness to the desired value in total safety and ease. |
| MECHANICAL PROTECTIONS | Front and bilateral blade protections reduce water dispersion, water splash, and moreover contribute to protecting the operator from accidental blade or debris contact. Electrical cables and water pipe feeding the cutting unit are protected by a robust yet very flexible plastic chain. |
| ELECTRICAL SUBSYSTEM | The machine’s electrical subsystem includes a magneto-thermal safety device protecting the engine from overheats/overloads, and even more importantly a release coil preventing accidental switch-ons following unexpected power supply breaks. |
| WATER PUMP | Based on magneto-inductive technology, it won’t fail/burn even in case of hard jamming. Extremely reliable, no filters to clean, maintenance free. |
| LEGS | Rear legs are provided with wheels to ease local machine movements. To facilitate machine handling and transportation all legs are retractable to reduce overall system size, and feature a special fall-protection system greatly easing operations even to a lone user. |
 |
Maximum cut depth 130 mm (double run) |
 |
Cutting head’s vertical tilt is accurately adjusted by a wheel-based mechanism |
 |
Cutting unit slides thanks to 6 armored stainless-steel ball bearings running onto 3 stainless-steel rails. |
 |
Mitre (45°) cut is easily enabled by simply side-reclining the horizontal sliding bridge. |
 |
The graded index installed at both bridge ends facilitates oblique edge cuts at other than 45° angles. |
 |
Sliding legs protecting the machine during transport. |
| ITEM | DESCRIPTION |
|---|---|
| 1108 | REVOLUTION 300 – BRIDGE STRUCTURE WET SAW – SUPPORTS Ø 300 AND 350MM BLADES – MAX LENGTH 100CM |
| 1109 | REVOLUTION 330 – BRIDGE STRUCTURE WET SAW – SUPPORTS Ø 300 AND 350MM BLADES – MAX LENGTH 130CM |
