- High professional quality diamond rim
- Exclusively for wet usage
- Recommended speed : 1000 – 2000 rpm
- Ideal to cut holes on ceramic, porcelain, marble or granite tiles
- Multiple diameters, and cylindrical stem or 1/2" connector options available
-
-
- High quality professional grade product
- Recommended to tiling contractors
- Minimizes bounce-back
- Two weights available
-
- High professional quality product
- Size 25 x 12 x h2.5 cm
- Available in 4 grains
- Recommended for many diverse applications
- Support pairing with three Ghelfi float models
-
- Wide structure
- recommended for effective building site sweeping
- High quality synthetic bristles
- Natural wood structure
- Beech wood handle available separately
-
- Harmonic steel blade
- Recommended to remove residues from flat hard surfaces (such as tiles).
- Two versions, three sizes available.
-
- Top quality single-lip stiff rubber
- Long durability
- Solid steel structure
- Two sizes available
- Wooden handle available separately
-
- Top quality soft rubber
- Long durability
- Solid steel structure
- Four sizes available
- Wooden handle available separately
-
- Top quality organic rubber
- Stays soft longtime
- Long durability
- Resistant to acids and other corrosive agents
- Solid steel structure
- Three sizes available
- Wooden handle available separately
-
- Ø175mm
- Spare part for 4-Abrasive Pad Disk
- 3 grains available
- Supports Ghelfi Twister and F.022 electrical brushes
-
- Recommended for smoothing concrete, cotto or resin floors
- Ø430MM disk plate
- Holds 4 x Ø175MM pads
- Supports Ghelfi Twister and F.022 electrical brushes
- Spare pads available in 3 different grain grades
-
- Recommended for floor scraping
- Support Ghelfi Twister electrical brushes via separately available driver tool
- Wide grains range available
-
- Ideal for floor scraping operations
- Ø425mm
- Available in several grain grades
- Recommended for Ghelfi Twister electrical brushes
- Installation requires a Driver Tool disk, available separately
-
FELT PADS Ø330 FOR F.09P - REQUIRE DRIVER ART.54 - AVAILABLE IN VARIOUS GRAINS (COLORS)- Recommended for scraping, cleansing and polishing
- Various grain grades available
- Various diameters available
- Support Ghelfi F.012, F.09P, F.022 and Twister electrical brushes
- Installation requires Felt Holder disk, available separately
-
- Ideal for cleansing after grouting
- Multiple diameters available
- Supports Ghelfi F.012, F.09P and F.022 electrical brushes.
-
- Support felt pads
- Multiple diametres and versions available
- Supports Ghelfi electrical brush models F.012, F.09P, F.022 and Twister.
-
GROUTING DISK - RECOMMENDED FOR GROUTING ONTO OPEN JOINTED FLOORS - SEVERAL VERSIONS AVAILABLE SUPPORTING MULTIPLE GHELFI ELECTRICAL BUSH MODELS -
- Designed to install a substrate / foundation smoother disk under Ghelfi electrical brushes.
- Supports Ghelfi electrical brush models F.09P, F.022 and Twister
-
SUBSTRATE AND FOUNDATION SMOOTHER - SEVERAL SIZES AVAILABLE - REQUIRES ART.0741/0742 HOLDER- Ideal for substrate/foundation smoothing.
- Available in two sizes: Ø480MM or Ø560MM.
- Supports Ghelfi electrical brush models F.09P, F.022 and Twister.
- A model-specific disk adapter is required for installation, available separately.
- Made in Italy
-
- Sturdy iron-teethed disk tool
- Recommended for scraping / removing dried adhesive from floors.
- Two versions available
- Supports Ghelfi electrical brush models F.022 and Twister.
-
- Recommended for cleansing / descaling cotto and other floors, particularly prone to scratches.
- Multiple diametres and versions available
- Supports Ghelfi elctrical brush models F.09P, F.022 and Twister.
-
- Recommended forfloor scraping and cleansing
- Multiple versions available
- Supports Ghelfi electrical brush models F.012, F.09P, F.022 and Twister
-
- Nylon-bristles brush tool.
- Ideal for cleansing during and after tile laying operations.
- Multiple diameters and versions available
- Supports Ghelfi electrical brush models F.012, F.09P, F.022 and Twister
-
- Perfectly cuts Expanded Polystyrene (EPS) or Expanded Extruded Polystyrene insulation panels
- Available in two version, with max cut lengths up to 105cm and 130cm
- Cut depth up to 26cm
- Modular full-aluminium structure
- Robust, solid, lightweight : it weighs 17+ Kg depending on version
- Low voltage (230V-36V) high power supply included
- Special extra-long durability thermal wire included
- Straight, skewed and partial cuts on all panel sides
- Fully removable cutting bow for freehand operation
- Wire heat-up time < 10 sec
- No pre-set downtime between wire heating cycels
- No-lock electrical switch safely drives wire turnoff between cuts
- Foldable side back-panel extension, scaffold fixation and lone stand kits available separately
- Made in Italy
-
- Perfectly cuts Expanded Polystyrene (EPS) or Expanded Extruded Polystyrene insulation panels
- Available in two version, with max cut lengths up to 120cm and 150cm
- Cut depth up to 25cm
- Modular full-aluminium structure
- Robust, solid, lightweight : it weighs 17+ Kg depending on version
- Low voltage (230V-36V) high power supply included
- Special extra-long durability thermal wire included
- Straight, skewed and partial cuts on all panel sides
- Fully removable cutting bow for freehand operation
- Wire heat-up time < 10 sec
- No pre-set downtime between wire heating cycels
- No-lock electrical switch safely drives wire turnoff between cuts
- Scaffold fixation and lone stand kits available separately
- Made in Italy
-
- Ø 21 cm
- Support electrical sanders
- 8 different grains available
-
- Invaluable to shape tiles' edges
- Available shapes include straight 45% angle, bullnose (several curvatures options) and groove
- Recommended for both porcelain and marble tiles
- Versions available for either wet or dry usage
- Minimum recommended engine power: 2HP
-
- M14 threaded bore
- Class-A diamonds
- High efficiency, excellent finish
- Supports both wet or dry use
- Recommended for grinding on very hard surfaces
- Two diameter options available
-
- High quality diamond blade for professional application
- Wet cut
- Recommended for tender materials such as marble, or tuff, cellular concrete and limestone.
- 10 mm laser welded sectors
- Mutiple diameter options available.
-
- Sector rim diamond blade
- High quality for professional application
- Supports both dry and wet cut
- Laser-based welding
- Sector height 7mm
- Good cutting speed and performance
- Ideal for self locking blocks, concrete, aggregated concrete, bricks.
- Multiple diameter options available.
-
- Sector rim diamond blade for professional application
- Recommended for both dry and wet cut
- Laser-based welding
- Sector height 7mm
- Good cut performance and durability
- Indicated for universal cutting
- Particularly recommended for building materials such as self locking blocks, concrete, and bricks.
- Multiple diameter options available.
-
- Sector rim diamond blade
- High quality for professional application
- Recommended for both dry and wet cut
- Laser-based welding and high diamond density
- High cutting speed and precision
- Supports cutting on all building materials, namely hard and porous ones.
- Ideal for self locking blocks, concrete, granite, porcelain, klinker, bricks, stones, porphyry.
- Multiple diameter options available.
-
- Continuous turbo rim diamond blade
- High quality for professional application
- Recommended for both dry and wet cut
- Excellent cut power
- High durability and stability
- 10mm rim height
- Supports cutting on all building materials
- Recommended for self locking blocks, concrete, aggregate concrete, bricks
- Multiple diameter options available
-
- Continuous rim diamond blade for professional application
- Supports wet cut
- Solid rim grants good precision and speed
- Recommended for universal cut on all type of ceramics and single fire tiles
- Multiple diameter options available
-
- Continuous "turbo" rim diamond blade
- Professional high quality grade
- Supports both dry and wet cut
- Taglio ad acqua o a secco
- High durability
- Particularly recommended for porcelain
- Several diameters available
-
- Adjacent sectors diamond blade
- High quality for professional application
- Supports both dry and wet cut
- Delivers precise and clean cuts
- Recommended for porcelain, granite and ceramics
- Multiple diameter options available
-
- Continuous rim diamond blade
- High quality product for professional application
- Supports wet and dry cut
- Extra smooth diamond grain allows for razor-sharp cut
- Recommended for mosaics, porcelain, glass tiles and all glossy or glass-based materials
- Multiple diameter options available
-
- Sector rim diamond blade
- High quality for professional application
- Supports both dry and wet cut
- Advanced manufacturing technology offering top performance
- Ideal for self locking blocks, concrete, armored concrete, ceramics, granite, porcelain, klinker, bricks, stones, porphyry, refractory.
- Multiple diameter options available.
-
Electrical wet table saw recommended for cutting ceramics, thin and thick porcelain and cotto tiles, slabs or blocks in marble, granite, porfiry, and bricks.- Italian high-quality single-phase 220-230V 3HP engine
- Direct to disc transmission
- Supports Ø350mm blades
- Max cut depth : 11,0cm in a single pass, 12,0cm in a dual pass
- Available in two standard versions, with max cutting lengths of 100cm or 130cm
- Can be orderd on custom length, up 300cm max cut length
- Weight: 55kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting ceramics, thin and thick porcelain and cotto tiles, slabs in marble, granite, porfiry and others natural stones.- Italian high-quality single-phase 220-230V 3HP (2.2KW) engine
- Direct to disc transmission
- Supports Ø250 and 300mm blades
- Max cut depth : 4,5/6,0cm in a single pass, 6,0cm in a dual pass
- Available in two standard versions, with max cutting lengths of 100cm or 130cm
- Can be orderd on custom length, up 300cm max cut length
- Weight: 55kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting ceramics, thin and thick porcelain and cotto tiles and slabs.- Italian high-quality single-phase 220-230V 2HP (1.5KW) engine
- Direct to disc transmission
- Supports Ø250 and 300mm blades
- Max cut depth : 4,5/7,0cm in a single pass, 9,5cm in a dual pass
- Available in three standard versions, with max cutting lengths of 70cm, 100cm or 130cm
- Can be orderd on custom length, up 300cm max cut length
- Weight: 52kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for ceramics, porcelain and cotto tile cutting- Italian high-quality single-phase 220-230V 1.5HP (1.1KW) engine
- Direct to disc transmission
- Supports Ø180 and 200mm blades
- Max cut depth : 3,5/4,5cm in a single pass, 5,5cm in a dual pass
- Available in three standard versions, with max cutting lengths of 70cm, 100cm or 130cm
- Can be orderd on custom length, up 200cm max cut length
- Weight: 50kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for depth calibration and box cuts
- Side head tilting system allows for 45° "Mitre" cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Mainenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting ceramics, thin and thick porcelain and cotto tiles, and bricks.- Italian high-quality single-phase 220-230V 2HP (1.5KW) engine
- POLY-V belt transmission
- Supports Ø250 and 300mm blades
- Max cut depth : 9.0/11.5cm in a single pass, 16.0cm in a dual pass
- Available in three standard versions, with max cutting lengths of 70cm, 100cm or 130cm
- Weight: 56kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting thick porcelain and cotto tiles, slabs in granite, porfiry and others natural stones.- Italian high-quality single-phase 220-230V 3.4HP (2.6KW) engine
- POLY-V belt transmission
- Supports Ø400 blades
- Max cut depth : 15cm in a single pass, 20cm in a dual pass
- Available in two standard versions, with max cutting lengths of 100cm or 130cm
- Can be orderd on custom length, up 350cm max cut length
- Weight: 110kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Handwheel-operated vertical head plunge system allows for millimetric depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting ceramics, thick porcelain and cotto tiles, slabs in marble, granite, porfiry and others natural stones.- Italian high-quality single-phase 220-230V 3HP (2.2KW) engine
- Direct to disc transmission
- Supports Ø300 and 350mm blades
- Max cut depth : 8.0/10.5cm in a single pass, 13.0cm in a dual pass
- Available in two standard versions, with max cutting lengths of 100cm or 130cm
- Can be orderd on custom length, up 350cm max cut length
- Weight: 99kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Handwheel-operated vertical head plunge system allows for millimetric depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting blocks of natural stones such as granite, porfiry and others, bricks, concrete and refractory materials.- Available in 2 versions
- Single-phase version: 230V 4HP (3KW) high quality Italian engine
- Three-phase version: 400V 5.5HP (4.1KW) high quality Italian engine
- POLY-V belt transmission
- Supports Ø650 blades
- Max cut depth : 25cm in a single pass, 34cm in a dual pass
- Max cutting lengths of 80cm
- Can be orderd on custom length, up 350cm max cut length
- Weight: 140kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Handwheel-operated vertical head plunge system allows for millimetric depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
- Ideal for easy floating floor installations
- Positioning: under tile corners
- Material: PVC
- Base item thickness: 14mm
- Additional item thickness: 3mm
- Max 3 Additional items can be installed on a Base item
-
- Facilitates facing bricks installation
-
- Facilitate glass blocks installation
-
- A levelling system for tiles and slabs
- Wedge technology
- Single-use base clips featuring linear shape
- Additional tab items facilitate installation under tile corners
- Patented reusable SPF Wedge also support countless third party levelling systems
- Tightening plier not required
- Recommended both for floor and wall tiling
- Supports tiles and slabs of any width and length
- Supports interior and exterior installations
- Manages tiles from 2 to 15mm thickness
- Built-in spacers for 1.5 , 3 or 5 mm joints
- Patented
- Made in Italy
-
- Invaluable to correctly set joint calibre during floor and wall tiling jobs
- Y shape supporting mixed hexagon and square tiles schemes
- Joint calibre: 3 mm
- High quality and precision
- Material: PVC
- Made in Italy