- Integrated handles
- Size: 40 x 40cm
- Capacity: 50lt
-
-
- Helps on marking an electrical box's position onto a tile
- Metallic structure.
- Max distance between reference tile border and electrical box's nearest borde: 50cm.
-
- Helps on transferring an item's contour shape onto a tile, and facilitate a precise subsequent cut
- Made of PVC
- Compact and lightweight
-
- Check the height of non-adjacent elements
- Length 25 mt
- Calibre 14/10
-
- Recommended for PVC tile profiles and trims cutting.
-
- Recommended for tile edge cutting.
- Hardened metal (wydia) plaque
- Callback spring.
-
- Small-sized head
- Help on enlarging bores on ceramic tiles
-
- High quality tool for professional tiling contractors
- Mark and cut-break on ceramic tiles
-
- Invaluable to correctly set joint calibre during floor and wall tiling jobs
- Y shape supporting mixed hexagon and square tiles schemes
- Joint calibre: 3 mm
- High quality and precision
- Material: PVC
- Made in Italy
-
- A levelling system for tiles and slabs
- Wedge technology
- Single-use base clips featuring linear shape
- Additional tab items facilitate installation under tile corners
- Patented reusable SPF Wedge also support countless third party levelling systems
- Tightening plier not required
- Recommended both for floor and wall tiling
- Supports tiles and slabs of any width and length
- Supports interior and exterior installations
- Manages tiles from 2 to 15mm thickness
- Built-in spacers for 1.5 , 3 or 5 mm joints
- Patented
- Made in Italy
-
- Facilitate glass blocks installation
-
- Facilitates facing bricks installation
-
- Ideal for easy floating floor installations
- Positioning: under tile corners
- Material: PVC
- Base item thickness: 14mm
- Additional item thickness: 3mm
- Max 3 Additional items can be installed on a Base item
-
Electrical wet table saw recommended for cutting blocks of natural stones such as granite, porfiry and others, bricks, concrete and refractory materials.- Available in 2 versions
- Single-phase version: 230V 4HP (3KW) high quality Italian engine
- Three-phase version: 400V 5.5HP (4.1KW) high quality Italian engine
- POLY-V belt transmission
- Supports Ø650 blades
- Max cut depth : 25cm in a single pass, 34cm in a dual pass
- Max cutting lengths of 80cm
- Can be orderd on custom length, up 350cm max cut length
- Weight: 140kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Handwheel-operated vertical head plunge system allows for millimetric depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting ceramics, thick porcelain and cotto tiles, slabs in marble, granite, porfiry and others natural stones.- Italian high-quality single-phase 220-230V 3HP (2.2KW) engine
- Direct to disc transmission
- Supports Ø300 and 350mm blades
- Max cut depth : 8.0/10.5cm in a single pass, 13.0cm in a dual pass
- Available in two standard versions, with max cutting lengths of 100cm or 130cm
- Can be orderd on custom length, up 350cm max cut length
- Weight: 99kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Handwheel-operated vertical head plunge system allows for millimetric depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting thick porcelain and cotto tiles, slabs in granite, porfiry and others natural stones.- Italian high-quality single-phase 220-230V 3.4HP (2.6KW) engine
- POLY-V belt transmission
- Supports Ø400 blades
- Max cut depth : 15cm in a single pass, 20cm in a dual pass
- Available in two standard versions, with max cutting lengths of 100cm or 130cm
- Can be orderd on custom length, up 350cm max cut length
- Weight: 110kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Handwheel-operated vertical head plunge system allows for millimetric depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting ceramics, thin and thick porcelain and cotto tiles, and bricks.- Italian high-quality single-phase 220-230V 2HP (1.5KW) engine
- POLY-V belt transmission
- Supports Ø250 and 300mm blades
- Max cut depth : 9.0/11.5cm in a single pass, 16.0cm in a dual pass
- Available in three standard versions, with max cutting lengths of 70cm, 100cm or 130cm
- Weight: 56kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for ceramics, porcelain and cotto tile cutting- Italian high-quality single-phase 220-230V 1.5HP (1.1KW) engine
- Direct to disc transmission
- Supports Ø180 and 200mm blades
- Max cut depth : 3,5/4,5cm in a single pass, 5,5cm in a dual pass
- Available in three standard versions, with max cutting lengths of 70cm, 100cm or 130cm
- Can be orderd on custom length, up 200cm max cut length
- Weight: 50kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for depth calibration and box cuts
- Side head tilting system allows for 45° "Mitre" cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Mainenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting ceramics, thin and thick porcelain and cotto tiles and slabs.- Italian high-quality single-phase 220-230V 2HP (1.5KW) engine
- Direct to disc transmission
- Supports Ø250 and 300mm blades
- Max cut depth : 4,5/7,0cm in a single pass, 9,5cm in a dual pass
- Available in three standard versions, with max cutting lengths of 70cm, 100cm or 130cm
- Can be orderd on custom length, up 300cm max cut length
- Weight: 52kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting ceramics, thin and thick porcelain and cotto tiles, slabs in marble, granite, porfiry and others natural stones.- Italian high-quality single-phase 220-230V 3HP (2.2KW) engine
- Direct to disc transmission
- Supports Ø250 and 300mm blades
- Max cut depth : 4,5/6,0cm in a single pass, 6,0cm in a dual pass
- Available in two standard versions, with max cutting lengths of 100cm or 130cm
- Can be orderd on custom length, up 300cm max cut length
- Weight: 55kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
Electrical wet table saw recommended for cutting ceramics, thin and thick porcelain and cotto tiles, slabs or blocks in marble, granite, porfiry, and bricks.- Italian high-quality single-phase 220-230V 3HP engine
- Direct to disc transmission
- Supports Ø350mm blades
- Max cut depth : 11,0cm in a single pass, 12,0cm in a dual pass
- Available in two standard versions, with max cutting lengths of 100cm or 130cm
- Can be orderd on custom length, up 300cm max cut length
- Weight: 55kg+ depending on version
- Main chassis built on extruded aluminium profiles: lightweight, undeformable, impervious to rust
- Head sliding based on armored stainless steel ball bearings
- Vertical head plunge system allows for depth calibration and box cuts
- Side head tilting system allows for 45° “Mitre” cuts
- Tilting mechanical safety guards on both blade sides
- Flexible hard plastic chain protecting electrical cables and water pipe. Chain elements are single-serviceable.
- Sliding legs, with fall-protection devices
- Wheels on back legs to facilitate on-site positioning
- Maintenance-free magnetic-induction technology electrical water pump
- Highly durable, non-leaking Polyethylene water tank, with screw-in cap
- Electrical switch featuring release coil and engine overheating sensor
- Various accessories available separately
- Made in Italy
-
- Sector rim diamond blade
- High quality for professional application
- Supports both dry and wet cut
- Advanced manufacturing technology offering top performance
- Ideal for self locking blocks, concrete, armored concrete, ceramics, granite, porcelain, klinker, bricks, stones, porphyry, refractory.
- Multiple diameter options available.
-
- Continuous rim diamond blade
- High quality product for professional application
- Supports wet and dry cut
- Extra smooth diamond grain allows for razor-sharp cut
- Recommended for mosaics, porcelain, glass tiles and all glossy or glass-based materials
- Multiple diameter options available
-
- Adjacent sectors diamond blade
- High quality for professional application
- Supports both dry and wet cut
- Delivers precise and clean cuts
- Recommended for porcelain, granite and ceramics
- Multiple diameter options available
-
- Continuous "turbo" rim diamond blade
- Professional high quality grade
- Supports both dry and wet cut
- Taglio ad acqua o a secco
- High durability
- Particularly recommended for porcelain
- Several diameters available
-
- Continuous rim diamond blade for professional application
- Supports wet cut
- Solid rim grants good precision and speed
- Recommended for universal cut on all type of ceramics and single fire tiles
- Multiple diameter options available
-
- Continuous turbo rim diamond blade
- High quality for professional application
- Recommended for both dry and wet cut
- Excellent cut power
- High durability and stability
- 10mm rim height
- Supports cutting on all building materials
- Recommended for self locking blocks, concrete, aggregate concrete, bricks
- Multiple diameter options available
-
- Sector rim diamond blade
- High quality for professional application
- Recommended for both dry and wet cut
- Laser-based welding and high diamond density
- High cutting speed and precision
- Supports cutting on all building materials, namely hard and porous ones.
- Ideal for self locking blocks, concrete, granite, porcelain, klinker, bricks, stones, porphyry.
- Multiple diameter options available.
-
- Sector rim diamond blade for professional application
- Recommended for both dry and wet cut
- Laser-based welding
- Sector height 7mm
- Good cut performance and durability
- Indicated for universal cutting
- Particularly recommended for building materials such as self locking blocks, concrete, and bricks.
- Multiple diameter options available.
-
- Sector rim diamond blade
- High quality for professional application
- Supports both dry and wet cut
- Laser-based welding
- Sector height 7mm
- Good cutting speed and performance
- Ideal for self locking blocks, concrete, aggregated concrete, bricks.
- Multiple diameter options available.
-
- High quality diamond blade for professional application
- Wet cut
- Recommended for tender materials such as marble, or tuff, cellular concrete and limestone.
- 10 mm laser welded sectors
- Mutiple diameter options available.
-
- M14 threaded bore
- Class-A diamonds
- High efficiency, excellent finish
- Supports both wet or dry use
- Recommended for grinding on very hard surfaces
- Two diameter options available
-
- Invaluable to shape tiles' edges
- Available shapes include straight 45% angle, bullnose (several curvatures options) and groove
- Recommended for both porcelain and marble tiles
- Versions available for either wet or dry usage
- Minimum recommended engine power: 2HP
-
- Ø 21 cm
- Support electrical sanders
- 8 different grains available
-
- Perfectly cuts Expanded Polystyrene (EPS) or Expanded Extruded Polystyrene insulation panels
- Available in two version, with max cut lengths up to 120cm and 150cm
- Cut depth up to 25cm
- Modular full-aluminium structure
- Robust, solid, lightweight : it weighs 17+ Kg depending on version
- Low voltage (230V-36V) high power supply included
- Special extra-long durability thermal wire included
- Straight, skewed and partial cuts on all panel sides
- Fully removable cutting bow for freehand operation
- Wire heat-up time < 10 sec
- No pre-set downtime between wire heating cycels
- No-lock electrical switch safely drives wire turnoff between cuts
- Scaffold fixation and lone stand kits available separately
- Made in Italy
-
- Perfectly cuts Expanded Polystyrene (EPS) or Expanded Extruded Polystyrene insulation panels
- Available in two version, with max cut lengths up to 105cm and 130cm
- Cut depth up to 26cm
- Modular full-aluminium structure
- Robust, solid, lightweight : it weighs 17+ Kg depending on version
- Low voltage (230V-36V) high power supply included
- Special extra-long durability thermal wire included
- Straight, skewed and partial cuts on all panel sides
- Fully removable cutting bow for freehand operation
- Wire heat-up time < 10 sec
- No pre-set downtime between wire heating cycels
- No-lock electrical switch safely drives wire turnoff between cuts
- Foldable side back-panel extension, scaffold fixation and lone stand kits available separately
- Made in Italy
-
- Nylon-bristles brush tool.
- Ideal for cleansing during and after tile laying operations.
- Multiple diameters and versions available
- Supports Ghelfi electrical brush models F.012, F.09P, F.022 and Twister
-
- Recommended forfloor scraping and cleansing
- Multiple versions available
- Supports Ghelfi electrical brush models F.012, F.09P, F.022 and Twister
-
- Recommended for cleansing / descaling cotto and other floors, particularly prone to scratches.
- Multiple diametres and versions available
- Supports Ghelfi elctrical brush models F.09P, F.022 and Twister.
-
- Sturdy iron-teethed disk tool
- Recommended for scraping / removing dried adhesive from floors.
- Two versions available
- Supports Ghelfi electrical brush models F.022 and Twister.
-
SUBSTRATE AND FOUNDATION SMOOTHER - SEVERAL SIZES AVAILABLE - REQUIRES ART.0741/0742 HOLDER- Ideal for substrate/foundation smoothing.
- Available in two sizes: Ø480MM or Ø560MM.
- Supports Ghelfi electrical brush models F.09P, F.022 and Twister.
- A model-specific disk adapter is required for installation, available separately.
- Made in Italy
-
- Designed to install a substrate / foundation smoother disk under Ghelfi electrical brushes.
- Supports Ghelfi electrical brush models F.09P, F.022 and Twister
-
GROUTING DISK - RECOMMENDED FOR GROUTING ONTO OPEN JOINTED FLOORS - SEVERAL VERSIONS AVAILABLE SUPPORTING MULTIPLE GHELFI ELECTRICAL BUSH MODELS -
- Support felt pads
- Multiple diametres and versions available
- Supports Ghelfi electrical brush models F.012, F.09P, F.022 and Twister.
-
- Ideal for cleansing after grouting
- Multiple diameters available
- Supports Ghelfi F.012, F.09P and F.022 electrical brushes.
-
FELT PADS Ø330 FOR F.09P - REQUIRE DRIVER ART.54 - AVAILABLE IN VARIOUS GRAINS (COLORS)- Recommended for scraping, cleansing and polishing
- Various grain grades available
- Various diameters available
- Support Ghelfi F.012, F.09P, F.022 and Twister electrical brushes
- Installation requires Felt Holder disk, available separately
-
- Ideal for floor scraping operations
- Ø425mm
- Available in several grain grades
- Recommended for Ghelfi Twister electrical brushes
- Installation requires a Driver Tool disk, available separately
-
- Recommended for floor scraping
- Support Ghelfi Twister electrical brushes via separately available driver tool
- Wide grains range available
-
- Recommended for smoothing concrete, cotto or resin floors
- Ø430MM disk plate
- Holds 4 x Ø175MM pads
- Supports Ghelfi Twister and F.022 electrical brushes
- Spare pads available in 3 different grain grades
-
- Ø175mm
- Spare part for 4-Abrasive Pad Disk
- 3 grains available
- Supports Ghelfi Twister and F.022 electrical brushes
-
- Top quality organic rubber
- Stays soft longtime
- Long durability
- Resistant to acids and other corrosive agents
- Solid steel structure
- Three sizes available
- Wooden handle available separately
-
- Top quality soft rubber
- Long durability
- Solid steel structure
- Four sizes available
- Wooden handle available separately
-
- Top quality single-lip stiff rubber
- Long durability
- Solid steel structure
- Two sizes available
- Wooden handle available separately
-
- Harmonic steel blade
- Recommended to remove residues from flat hard surfaces (such as tiles).
- Two versions, three sizes available.
-
- Wide structure
- recommended for effective building site sweeping
- High quality synthetic bristles
- Natural wood structure
- Beech wood handle available separately
-
- High professional quality product
- Size 25 x 12 x h2.5 cm
- Available in 4 grains
- Recommended for many diverse applications
- Support pairing with three Ghelfi float models
-
- High quality professional grade product
- Recommended to tiling contractors
- Minimizes bounce-back
- Two weights available
-
- High professional quality diamond rim
- Exclusively for wet usage
- Recommended speed : 1000 – 2000 rpm
- Ideal to cut holes on ceramic, porcelain, marble or granite tiles
- Multiple diameters, and cylindrical stem or 1/2" connector options available
-
- Cylindrical stem
- Wet use only
- Recommended rotation speed: 1000-2000 rpm
- Ideally apply onto ceramic, porcelain, marble or granite tiles or slabs
- Multiple diameter options available
-
- High quality diamond Diamante di alta qualità depositato direttamente sul corpo del foretto
- Hex or M14 connector
- High performance even on dry use
- Usable for wet cutting too
- Recommended speed: 4000 - 11000 rpm
- Ideal for cutting holes on ceramic, porcelain, marble or granite tiles
- Several diameter options available
-
- Highly professional tool
- Tempered carbon steel 280X120mm perfectly flat blade, with 2 notched edges
- Symmetrically shaped handle
- Wooden handle, Energy rubber handle and ABS handle options available
- Wide range of notches available
- Made in Italy
-
- Highly professional tool dedicated to plastering specialists
- Tempered carbon steel perfectly flat blade
- Symmetrically shaped handle
- Wooden handle, Energy rubber handle and ABS handle options available
- Wide range of sizes
- Made in Italy
-
- Highly professional tool
- Mixed PVC/ABS flat blade
- Symmetrically shaped handle
- Wooden handle and ABS handle options available
- Made in Italy
-
- Highly professional tool dedicated to venetian stucco specialists
- Cutlery-grade stainless steel perfectly flat blade
- Deburred and rounded edges
- Symmetrically shaped handle
- Wooden handle and Energy rubber handle options available
- Wide range of sizes
- Made in Italy
-
- Trapeze or rectangular shaped
- 1 toothed edge
- Ideal for drawing glue on small spaces, or on tile backs.
- Three widths and different tooth sizes available.
-
- Top professional quality product
- Tempered carbon steeel blade 500 x 120 x 0,7mm
- Beech wood dual-hand handle
- Ideal for plasters and adhesives
- Made in Italy
-
- Top professional quality product
- Tempered carbon steeel blade 500 x 140 mm with 2 notched edges
- Beech wood dual-hand handle
- Wide range of notch options available
- Made in Italy
-
- Tempered steel blade, featuring perfect flatness and decreasing thickness
- Symmetrical shaped handles
- Beech Wood or Energy Rubber "soft-grip" handles options
- Wide range of different sizes
- Top professional quality
- Made in Italy
-
- Flat or semi-round profile versions available
- Beech wood handle
- Wide range of different widths
- Top professional quality
- Made in Italy
-
- Aluminium base structure
- Wooden handle
- 4 rubber-sponge porosity options available
- 2 size options available
- Ideal for both premixed and traditional plasters smoothing
- High professional quality
- Made in Italy
-
- Two versions available featuring structures of different materials
- Multiple size options available
-
- Invaluable to correctly set joint calibre during floor and wall tiling jobs
- X shape supporting straight bonds
- Available in 7 different joint calibres – from 1 to 10 mm
- High quality and precision
- Material: PVC
- Made in Italy
-
- Invaluable to correctly set joint calibre during floor and wall tiling jobs
- T shape supporting running bonds
- Available in 7 different joint calibres - from 1 to 10 mm
- High quality and precision
- Material: PVC
- Made in Italy
-
- Wedge-shaped tile spacers
- Recommended for joint calibration on wall tiling jobs
- Three sizes available
- Made in Italy
-
- Plastic structure
- Single cup
- Ø 6.5 cm
- Max load 2 Kg
-
- Solid rubber structure
- Single cup
- Ø 12 cm
- Max load 2 Kg
-
- Sistema livellante per piastrelle e lastre
- Tecnologia a cuneo
- Elementi base usa e getta di forma lineare, compatibili con i cunei delle marche più diffuse
- Due diversi cunei livellanti, entrambi riutilizzabili
- Cuneo universale ZERO: sfruttabile anche con basi livellanti di altre marche
- Cuneo brevettato SPF: altezza posteriore maggiorata e struttura aperta per piena visibilità sul punto di applicazione
- Pinza di serraggio con doppia calibrazione e struttura interamente metallica
- Raccomandato sia per pose a pavimento che a parete
- Applicabile a piastrelle e lastre di qualsiasi dimensione
- Supporta pose all’interno e all’esterno
- Gestisce piastrelle di spessore da 1 a 32 mm
- Distanziatori incorporati per fughe da 0.5 a 4 mm per piastrelle da interni, e 5mm per lastre spessorate da esterni
- Made in Italy
-
- A levelling system for tiles and slabs
- Wedge technology
- Single-use base clips featuring linear shape, compatible with most third party wedges
- Two alternative levelling wedges, both reusable many times
- ZERO Universal Wedge: can be paired with third party levelling clips
- SPF Patented Wedge: taller back end, and an open visual on application point
- Dual calibration, full-metal tightening plier
- Recommended both for floor and wall tiling
- Supports tiles and slabs of any width and length
- Supports interior and exterior installations
- Manages tiles from 1 to 32mm thickness
- Built-in spacers for joints from 0.5 to 4 mm for interior installs, and 5 mm for exterior installs
- Made in Italy
-
Macchina elettrica a carrello per il taglio ad acqua indicata per il taglio di poroton, tufo, laterizi e manufatti in cemento.- Disponibile in due diverse motorizzazioni di alta qualità italiana: 220-230V 3,4CV (2,5KW) oppure 380-400V 5,5CV (4,1KW)
- Trasmissione a cinghia POLY-V
- Supporta dischi Ø730mm
- Spessore di taglio massimo 30,0cm singola passata, 40,0cm doppia passata
- Peso a vuoto 130kg
- Struttura in profilati di alluminio: leggera, indeformabile, immune alla ruggine
- Cuscinetti di scorrimento carrello in acciaio inox blindati
- Dispositivo antiribaltamento su entrambi i lati del carrello
- Sistema di protezioni meccaniche basculanti ai lati del disco
- Gambe scorrevoli con sistema anticaduta
- Ruote in gomma su tutte le gambe
- Baricentro ridotto per maggior stabilità
- Vasca in polietilene extra-resistente e immune alla ruggine con tappo svitabile
- Interruttore elettrico con bobina di sgancio e sensore termico
- Made in Italy
-
RAPTOR 730 - AVAILABLE EITHER WITH 3,4HP 230V ENGINE OR WITH 5,5HP 400V ENGINE - POLY-V BELT TRANSMISSION - SUPPORTS Ø730 BLADES - CUT DEPTH 30CM IN 1 PASS, 40CM IN DOUBLE PASS
-
Macchina elettrica a carrello per il taglio ad acqua indicata per il taglio di poroton, tufo, laterizi e manufatti in cemento.- Motore di alta qualità italiana 220-230V 3,4CV (2,5KW)
- Disponibile in due versioni che supportano rispettivamente per dischi Ø700mm o Ø600mm
- Spessore di taglio massimo 25,0cm (20,0 cm) singola passata, 30,0cm (27,0 cm) doppia passata
- Peso a vuoto 130kg
- Struttura in profilati di alluminio: leggera, indeformabile, immune alla ruggine
- Cuscinetti di scorrimento carrello in acciaio inox blindati
- Dispositivo antiribaltamento su entrambi i lati del carrello
- Sistema di inclinazione laterale della testa per taglio a 45° “jolly”
- Sistema di protezioni meccaniche basculanti ai lati del disco
- Gambe scorrevoli con sistema anticaduta
- Ruote in gomma su tutte le gambe
- Baricentro ridotto per maggior stabilità
- Pompa elettrica a induzione magnetica, priva di manutenzione
- Vasca in polietilene extra-resistente e immune alla ruggine con tappo svitabile
- Interruttore elettrico con bobina di sgancio e sensore termico
- Made in Italy
-
RAPTOR DIRECT - 3,4HP 230V ENGINE - AVAILABLE IN 2 VERSIONS SUPPORTING EITHER Ø600 or Ø700 MM BLADES - CUT DEPTH 25CM IN 1 PASS, 30CM IN DOUBLE PASS (Ø700)
-
- Sistema livellante per piastrelle e lastre
- Tecnologia a vite
- Tappo riutilizzabile con sistema di sgancio rapido e profilo antigraffio
- Struttura aperta per piena visibilità sul punto di applicazione
- Elementi a vite usa e getta con forma lineare, X o T
- L'utilizzo non richiede utensili
- Raccomandato sia per pose a pavimento che a parete
- Applicabile a piastrelle e lastre di qualsiasi dimensione
- Supporta pose all'interno e all'esterno
- Gestisce piastrelle di spessore da 2 a 30 mm
- Distanziatori incorporati per fughe da 1 a 4 mm
- Brevettato
- Made in Italy
-
- Levelling system for tiles and slabs
- Screw technology
- Reusable cap with quick unlock system and scratch-savy edge
- Open structure granting full visibility on application point
- Single-use screw clips in linear, X or T shape
- No tools required for application
- Recommended both for floor and wall tiling
- Usable on tiles and slabs of any length and width
- Supports both interior and exterior tiling
- Supported tile thickness: 2 to 30 mm
- Built-in spacer calibres: 1 to 4 mm
- Patented
- Made in Italy
-
SQUALETTO FLEX - BANCO DA TAGLIO A SECCO ESPANDIBILE IN LUNGHEZZA E LARGHEZZA PER TAGLI SU LASTRE FINO A 410CM. UTILIZZA SMERIGLIATRICI ANGOLARI STANDARD CON DISCO DA 125MM, VELOCITA' VARIABILE E POTENZA MINIMA 1400 W -
SQUALETTO FLEX - EXTENSIBLE BENCH TO FACILITATE DRY CUT ON SLABS UP TO 410 CM - SUPPORTS STANDARD 125 MM ANGLE GRINDERS FEATURING VARIABLE SPEED AND MIN 1.4KW POWER. -
- High quality, recommended to professional contractors
- Made in Italy
- Single cup
- Pump system for depression generation and re-generation
- Visual gauge (vacu-meter) to monitor grip efficiency
- Stain prevention treatment applied on rubber cups
- Supple rubber profile hels compensate small surface imperfections
- Available in two versions: Ø 15 cm max load 90 kg, or Ø 20 cm max load 150 kg
-
- Alta qualità professionale
- Made in Italy
- Singola impronta
- Pompa di rigenerazione del vuoto
- Indicatore visivo dello stato della presa (vacuometro)
- Gomma con trattamento antimacchia
- Profilo morbido per compensare piccole irregolarità superficiali
- Disponibile in due versioni: Ø 15 cm portata massima 90 Kg e Ø 20 cm portata massima 150 Kg
-
- Gamma di attrezzature per la manipolazione e il trasporto di lastre in gres fino a 3,2 x 1,6 m
- Barre telescopiche in profilato estruso di alluminio
- Inflessibili, resistenti, inattaccabili dalla ruggine
- Ventose di alta qualità con sistema a pompa di rigenerazione del vuoto e indicatore di stabilità della presa (vacuometro)
- Fissaggi ventosa basculanti per facilitare l'applicazione sulla piastrella
- Maniglie ergonomiche in gomma (incluse in alcune configurazioni)
- Ganci metallici di arresto caduta per ulteriore livello di sicurezza (inclusi in alcune configurazioni)
- Tre configurazioni standard tutte espandibili e tra loro integrabili
- Ampia gamma di parti ed accessori per ulteriore espansione acquistabili separatamente
-
- Range of professional equipment to facilitate handling and moving large format ceramic porcelain tiles
- Handle slabs up to 3.2 x 1.6 m
- Extruded aluminium profiles telescopic bars
- Unflexible, sturdy, impervious to rust
- High quality made in Italy suction cups featuring pump-based void generation system and grip efficiency gauge (vacu-meter)
- Tilting fixings help suction cups application on tiles
- Ergonomic gum handles (included with some configuration)
- Fall prevention metal hooks as extra safety measure (included with some configuration)
- Three standard configurations available, all upgradable and integratable with one another
- Wide range of expansion parts and accessories available separately
-
- Facilita la movimentazione di lastre in gres porcellanato
- Ruote in gomma piroettanti
- Staffe di supporto regolabili per sistemi di movimentazione lastre con ventose
- Gancio di sicurezza regolabile
- Struttura pieghevole per facile trasporto
- Ingombro in posizione richiusa: 110x50x25cm
- Supporta lastre dimensione max 3.5 x 2 m
- Supporta lastre con almeno un lato di lunghezza min 1 m
- Portata max 250kg
- Peso 18kg
-
- Helps moving and processing on large format porcelain tiles and slabs
- Pivoting rubber wheels
- Adjustable hooks to support large format handling systems
- Adjustable security hook
- Foldable structure allowing for easy transport
- Folded size: 110x50x25cm
- Supports slabs up to max 3.5 x 2 m size
- Supports slabs with at least one side min 1 m long
- Max load: 250kg
- Weight: 18kg
-
- Ideale per lavorazioni su lastre in ceramica, gres porcellanato, kerlite, o pietra naturale
- Struttura in profilati di alluminio robusta e leggera
- Gambe richiudibili per trasporto
- Dimensioni in modalità lavoro: lunghezza 180cm, larghezza 58-98cm
- Dimensione in modalità trasporto: 180 x 58 x 10cm
- Peso 30Kg
- Portata max 150Kg/mq
-
- Ideal for multiple processings on ceramic, porcelain, kerlite or natural stone slabs
- Heavy duty yet lightweight aluminium profiles structure
- Foldable legs
- Work position size: 180cm length, 58-98cm width
- Folded size: 180 x 58 x 10cm
- Weight: 30Kg
- Max load up to 150Kg/mq
-
- Taglia perfettamente pannelli isolanti in Polistirene Espanso (EPS) o Polistirene Espanso Estruso (XPS)
- Lunghezza di taglio fino a 130cm
- Spessore di taglio fino a 25cm
- Struttura modulare in alluminio
- Robusta, resistente, leggera: pesa 7 Kg
- Alimentatore a bassa tensione (230V-36V) e alta potenza fornito di serie
- Filo termico speciale durata extra lunga
- Tagli dritti, parziali e ad angolo su entrambi i lati del pannello
- Archetto di taglio completamente estraibile per utilizzo a mano libera
- Tempo di riscaldamento del filo < 10 sec
- Nessuno tempo morto predefinito tra un'accensione e la successiva
- Interruttore di sicurezza privo di blocco in posizione di accensione
- Estensione laterale disponibile opzionalmente
- Kit di fissaggio a ponteggio disponibile opzionalmente
- Made in Italy
-
- Perfectly cuts Expanded Polystyrene (EPS) or Expanded Extruded Polystyrene insulation panels
- Cut length up to 130cm
- Cut depth up to 25cm
- Modular full-aluminium structure
- Robust, solid, lightweight : it weighs only 7 Kg
- Low voltage (230V-36V) high power supply included
- Special extra-long durability thermal wire included
- Straight, skewed and partial cuts on all panel sides
- Fully removable cutting bow for freehand operation
- Wire heat-up time < 10 sec
- No pre-set downtime between wire heating cycels
- No-lock electrical switch safely drives wire turnoff between cuts
- Side extension, scaffold fixation kits available separately
- Made in Italy
-
Extensible, lightweight, heavy duty stand for multifunction work tables- Full wide-open size : 110 x 160 cm
- Collapsed size : just 21 x 25 x 84cm, and 9 Kg weight
- Aluminium structure
- Super-easy to transport
- Unfold / refold it in seconds
- Supports any solid panel - even a spare, recycled one
- Aluminium slats upgrade kit for tilers, and other accessories available separately
- Max load up to 150 Kg/mq
- Made in Italy
-
Struttura estensibile, robusta e leggera per realizzare banchi da lavoro multifunzione.
- Estensione massima 110 x 160 cm
- Completamente richiuso occupa solo 25 x 21 x 84cm, e pesa 9 Kg
- Facilissimo da trasportare
- Si apre e si chiude in un attimo
- Supporta un qualsiasi pannello rigido - anche di recupero
- Kit superfici di lavoro a doghe metalliche scorrevoli fino a max 150x180cm acquistabili separatamente
- Ulteriori accessori opzionali
- Portata fino a 150 Kg/mq
- Made in Italy
-
- Prodotto di altissima qualità professionale
- Lama in acciaio al carbonio 500 x 140 x 0,4mm extrafina
- Manico per impugnatura a due mani in legno di faggio
- Ideale per la stesura di prodotti cementizi ed acrilici.
- Made in Italy
-
- Top professional quality product
- Tempered carbon extra-thin steeel blade 500 x 120 x 0,4mm
- Beech wood dual-hand handle
- Ideal for concrete-based and acrylical products drawing.
- Made in Italy
-
- Utensile altamente professionale dedicato agli specialisti della posa del microcemento
- Lama extrasottile (0,4mm) in acciaio al carbonio temperato, perfettamente piana
- Manico in legno di faggio di forma simmetrica
- Made in Italy
-
- Highly professional tool dedicated to microcement smoothing specialists
- Tempered carbon steel perfectly flat extra-thin (0.4mm) blade
- Symmetrically shaped wooden handle
- Made in Italy
-
- Diametro 115mm
- Foro filettato M14
- Diamante di alta qualità elettrodepositato
- Utilizzo a secco o ad acqua
- Velocità di rotazione consigliata 12000-14000 giri/min
- Due grane disponibili
- Utile per tagliare, molare, sgrossare, rifinire materiali eterogenei
- Raccomandato per pietre, granito, marmo, gres porcellanato, vetro, mosaico, cemento
-
- Diametro 115mm
- Foro filettato M14
- Diamante di alta qualità elettrodepositato
- Utilizzo a secco o ad acqua
- Velocità di rotazione consigliata 12000-14000 giri/min
- Due grane disponibili
- Utile per tagliare, molare, sgrossare, rifinire materiali eterogenei
- Raccomandato per pietre, granito, marmo, gres porcellanato, vetro, mosaico, cemento
-
- Disco diamantato corona continua turbo
- Alta qualità per utilizzo professionale
- Taglio ad acqua o a secco
- Corona diamantata alta 10 mm
- Supporta taglio di pietre minerali naturali come Dekton o Lapitec
- Consigliato anche per gres porcellanato
-
- Continuous turbo rim diamond blade
- High quality for professional application
- Recommended for both dry and wet cut
- Excellent cut power
- 10mm rim height
- Supports cutting on mineral natural stones such as Dekton or Lapitec
- Also ideal on porcelain tiles
-
- Contribuisce alla precisione del taglio del bordo a 45° ("jolly")
- Supporta Revolution 300, e dischi Ø 300mm
- Indicato per macchine con capacità di taglio superiori a 150cm
-
- cnhances 45° ("jolly") edge cut precision.
- Supports Revolution 300 and Ø 300 mm blades.
- Suitable for machines with a cutting capacity exceeding 150 cm length.